PVC plastic sheet for inkjet printing on one side has a special layer (paymer), which is applied to the image.
Due to the special characteristics paymera ink does not spread, and just gets into the pores of plastic and secured to them.
Due to these properties of plastic inkjet printing method allows to achieve such a clear image and good print quality.
The downside of plastic inkjet processed adhesive (hot melt) to improve the quality of sintering at a press laminating.
One of the most modern solutions of plastics to become self-adhesive inkjet plastic Stick Card. This material is relevant in the production of contactless cards, IDs, since the change of the holder is sufficient to replace the front-side stick, and the base with a microchip and basic information will remain the same.
The color scheme of plastic for inkjet printing:
- silver - two colors
- gold - the four colors
Plastic PVC for offset printing
Plastic PVC for offset printing is suitable for the manufacture of cards shelkotrafretnym or offset. He usually has a thickness of 0.3 mm, the most common format - A4. Offset printing - one of the most common methods for printing plastic cards, because you can get exceptional image quality with the release of almost any circulation of products. Subdivided into types, depending on the type of paint:
- Print conventional paints - can only be one-sided. The design is similar to the plastic sheet for inkjet printing (face-primer, the turnover-hotmelt)
- Printing with UV inks with UV drying (printing is possible folic dyes) - an ordinary sheet of PVC without coatings. Can be used for duplex printing
- Opaque plastic to print folic and UV inks. Its distinctive feature is that even the smallest thickness of the sheet allows for two-sided printing
Sheet plastic PVC with a contactless smart chip
Sheet plastic PVC with a contactless smart chip EM-MARIN, or MIFARE is used to produce contactless smart cards. Serves as a "filling" in the design of the card. Available in A4 format, with 10 chips on a sheet.
The substrate is cheaper white plastic, with no additional coating that is used in the manufacture of one-sided cards. Available in A4 format, sheet thickness 0.3 mm.